Booting Z/OS Emulation Files with Hercules

I recently stumbled across some (illegal) Z/OS emulation files for Hercules on The Pirate Bay a while back, but one thing which I couldn’t figure out was to actually get them working. With a little bit of searching, I’ve finally figured it out. This guide should help anyone who has absolutely no background with IBM mainframes or Hercules – but for some reason wishes to play with a mainframe – to get started.

Step 1: Required Programs and Files

You will need to download and install:

Secondly, you will need to obtain the Z/OS emulation files for Hercules (hint: search TPB or google ‘IBM Z OS Emulation files’)

Step 2: Configure your 3270 Terminal Emulator

Open the wc3270 Session Wizard and create a new session with the host set to localhost and the TCP port number set to 3270. Be sure to save your session by hitting ‘[Enter]’ at the menu. You may want to create a desktop shortcut to be used later.

Step 3: Configure hercules.cnf

Ensure that your hercules.cnf file references your DASD devices correctly. The paths from the configuration file may be relative. However, in my case, I’ve provided absolute paths.

Note that my DSAD files are on my D:\ibm\cckd\ directory. If you are using relative paths, ensure that your hercules.cnf file is in the correct location, relative to your cckd files.

Ensure your display terminals are set to 3270.

My hercules.cnf is as follows:


#
# Hercules Emulator Control file...
# Description:
# MaxShutdownSecs: 15
#
#
# System parameters
#

ARCHMODE z/Arch
ALRF ENABLE
CCKD RA=2,RAQ=4,RAT=2,WR=2,GCINT=5,GCPARM=0,NOSTRESS=0,TRACE=0,FREEPEND=-1
CNSLPORT 3270
CONKPALV (3,1,10)
CPUMODEL 3090
CPUSERIAL 012345
DIAG8CMD ENABLE
ECPSVM YES
LOADPARM 0A95DB..
LPARNAME HERCULES
MAINSIZE 1024
MOUNTED_TAPE_REINIT DISALLOW
NUMCPU 4
OSTAILOR Z/OS
PANRATE 80
PGMPRDOS LICENSED
SHCMDOPT NODIAG8
SYSEPOCH 1900
TIMERINT 50
TZOFFSET +1400
YROFFSET 0

HERCPRIO 0
TODPRIO -20
DEVPRIO 8
CPUPRIO 0
PANTITLE z/OS 1.9 IPL A80?

# Display Terminals

0700 3270
0701 3270
0702 3270
0703 3270
0704 3270

# DASD Devices

0A81 3390 D:/ibm/cckd/zares1.cckd sf=shadow/zares1_*
0A82 3390 D:/ibm/cckd/zares2.cckd sf=shadow/zares2_*
0A83 3390 D:/ibm/cckd/zadb81.cckd sf=shadow/zadb81_*
0A84 3390 D:/ibm/cckd/zadb82.cckd sf=shadow/zadb82_*
0A85 3390 D:/ibm/cckd/zadb83.cckd sf=shadow/zadb83_*
0A86 3390 D:/ibm/cckd/zadb84.cckd sf=shadow/zadb84_*
0A87 3390 D:/ibm/cckd/zadb91.cckd sf=shadow/zadb91_*
0A88 3390 D:/ibm/cckd/zadb92.cckd sf=shadow/zadb92_*
0A89 3390 D:/ibm/cckd/zacic1.cckd sf=shadow/zacic1_*
0A8A 3390 D:/ibm/cckd/zadis1.cckd sf=shadow/zadis1_*
0A8B 3390 D:/ibm/cckd/zadis2.cckd sf=shadow/zadis2_*
0A8C 3390 D:/ibm/cckd/zadis3.cckd sf=shadow/zadis3_*
0A8D 3390 D:/ibm/cckd/zadis4.cckd sf=shadow/zadis4_*
0A8E 3390 D:/ibm/cckd/zadis5.cckd sf=shadow/zadis5_*
0A8F 3390 D:/ibm/cckd/zadis6.cckd sf=shadow/zadis6_*
0A90 3390 D:/ibm/cckd/zaims1.cckd sf=shadow/zaims1_*
0A91 3390 D:/ibm/cckd/zaprd1.cckd sf=shadow/zaprd1_*
0A92 3390 D:/ibm/cckd/zaprd2.cckd sf=shadow/zaprd2_*
0A93 3390 D:/ibm/cckd/zaprd3.cckd sf=shadow/zaprd3_*
0A94 3390 D:/ibm/cckd/zaprd4.cckd sf=shadow/zaprd4_*
0A95 3390 D:/ibm/cckd/zasys1.cckd sf=shadow/zasys1_*
0A96 3390 D:/ibm/cckd/zauss1.cckd sf=shadow/zauss1_*
0A97 3390 D:/ibm/cckd/zawas1.cckd sf=shadow/zawas1_*
0A98 3390 D:/ibm/cckd/zawas2.cckd sf=shadow/zawas2_*
0A99 3390 D:/ibm/cckd/zawas3.cckd sf=shadow/zawas3_*
0A9A 3390 D:/ibm/cckd/sares1.cckd sf=shadow/sares1_*

 

Step 4: Starting Hercules

Start hercules on the same directory as your hercules.cnf file. In my case:

D:\ibm>"C:\Program Files\Hercules\Hercules 3.07 (64 Bit)\hercules.exe"

Hercules should start and you should see something similar to:

Press ‘ESC’ to switch to the graphic mode. Start two instances of the 3270 terminals that was made and configured in Step 2. The first will be the console terminal, the second will be the TSO terminal. If everything works, you should see two terminals binded to Hercules:

To start Z/OS, press ‘L’ for IPL, then F for the first Z/OS disk device (as highlighted above). Z/OS should begin loading.

The terminal console should halt and prompt whether to initialize sysplex ADCDPL or to reinitalize XCF. Enter ‘r 00,r’

It will then prompt asking for the couple system parameter. Enter ‘r 00,couple=**’

Step 5: Have Fun

The login screen should appear on the second terminal. You may login as ‘IBMUSER’ with the password ‘SYS1’.

22 thoughts on “Booting Z/OS Emulation Files with Hercules

  1. hi bro my configuration file which was in the images i downlaoded was like this
    #********************************************************************
    # CONFIGURAGION FILE FOR ADCD Z/OS 1.10 SUMMER *
    #********************************************************************
    # FOR ALL THE LOADPARM OPTIONS VISIT: *
    # http://dtsc.dfw.ibm.com/MVSDS/'HTTPD2.ADCD.GLOBAL.HTML(READ110S)‘ *
    #********************************************************************

    ARCHMODE z/Arch
    OSTAILOR z/OS
    CPUSERIAL 08A89F
    CPUMODEL 2084
    LPARNAME ACDC
    LOADPARM 0A82CSM1
    MODEL EMULATOR
    PLANT ZZ
    MAINSIZE 1536
    NUMCPU 4
    SYSEPOCH 1900
    TZOFFSET -0000
    HTTPPORT 8080 AUTH HERCULES HERCULES
    PANTITLE “ADCD z/OS 1.10 on Hercules”
    PANRATE FAST
    CNSLPORT 23
    PGMPRDOS LICENSED

    #********************************************************************
    # SYMBOLS DEFINITION *
    #********************************************************************

    DEFSYM DASD “Z110/DASD”
    DEFSYM PROD “Z110/PROD”
    DEFSYM PRTR “Z110/PRTR”

    #********************************************************************
    # ORIGINAL ADCD z/OS 1.10 SUMMER IMAGES *
    #********************************************************************

    000F 1403 $(PRTR)/IBM/PRTR.000F

    0A80 3390 $(DASD)/IBM/JARES1.CCKD
    0A81 3390 $(DASD)/IBM/JARES2.CCKD
    0A82 3390 $(DASD)/IBM/JASYS1.CCKD
    0A83 3390 $(DASD)/IBM/JAUSS1.CCKD
    0A84 3390 $(DASD)/IBM/JAPRD1.CCKD
    0A85 3390 $(DASD)/IBM/JAPRD2.CCKD
    0A86 3390 $(DASD)/IBM/JAPRD3.CCKD
    0A87 3390 $(DASD)/IBM/JAIMS1.CCKD
    0A88 3390 $(DASD)/IBM/JACIC1.CCKD
    0A89 3390 $(DASD)/IBM/JADB91.CCKD
    0A8A 3390 $(DASD)/IBM/JADB92.CCKD
    0A8B 3390 $(DASD)/IBM/JADB93.CCKD
    0A8C 3390 $(DASD)/IBM/JAWAS1.CCKD
    0A8D 3390 $(DASD)/IBM/JAWAS2.CCKD
    0A8E 3390 $(DASD)/IBM/JAWAS3.CCKD
    0A8F 3390 $(DASD)/IBM/SARES1.CCKD #LOADPARM 0A99SAM1

    0A91 3390 $(DASD)/IBM/JADIS1.CCKD
    0A92 3390 $(DASD)/IBM/JADIS2.CCKD
    0A93 3390 $(DASD)/IBM/JADIS3.CCKD
    0A94 3390 $(DASD)/IBM/JADIS4.CCKD
    0A95 3390 $(DASD)/IBM/JADIS5.CCKD
    0A96 3390 $(DASD)/IBM/JADIS6.CCKD

    #********************************************************************
    # CUSTOM IMAGES *
    #********************************************************************
    # VOLUME NAMING CONVENTION *
    # .—–> 1 CHAR SYSPLEX NAME (SYSPLX “A”) *
    # |.–.-> 3 CHAR PURPOSE RES=SYSRES SPL=SPOOL CKP=CHECKPOINT *
    # || \> USR=USER CFG=SYS PAG=PAGE SMS=SMS *
    # || .-> SEQUENCE OR SYSCLONE FOR CONFIGURATION VOLUME *
    # VV V *
    # xxxxxx *
    #********************************************************************
    0AA0 3390 $(DASD)/SYS/SYS001.CCKD
    0AA1 3390 $(DASD)/SYS/SPL001.CCKD
    0AA2 3390 $(DASD)/SYS/SPL002.CCKD
    0AA3 3390 $(DASD)/SYS/SPL003.CCKD
    0AA4 3390 $(DASD)/SYS/SPL004.CCKD
    0AA5 3390 $(DASD)/SYS/SPL005.CCKD
    0AA6 3390 $(DASD)/SYS/CKP001.CCKD
    0AA7 3390 $(DASD)/SYS/CKP002.CCKD
    0AA8 3390 $(DASD)/SYS/PAG001.CCKD
    0AA9 3390 $(DASD)/SYS/PAG002.CCKD
    0AAA 3390 $(DASD)/SYS/USS001.CCKD
    0AAB 3390 $(DASD)/SYS/AUT001.CCKD
    0AAC 3390 $(DASD)/SYS/DMP001.CCKD
    0AAF 3390 $(DASD)/SYS/AZZSAD.CCKD

    0AB0 3390 $(DASD)/SYS/USR001.CCKD
    0AB1 3390 $(DASD)/SYS/USR002.CCKD
    0AB2 3390 $(DASD)/SYS/USR003.CCKD
    0AB3 3390 $(DASD)/SYS/USR004.CCKD
    0AB4 3390 $(DASD)/SYS/USR004.CCKD

    #********************************************************************
    # DISPLAY TERMINALS *
    #********************************************************************
    0700 3270
    #0701 3270
    0702.14 3270

    #********************************************************************
    # CTCI COMMUNICATION DEVICES *
    #********************************************************************
    0E20.2 LCS 10.0.1.20

    #********************************************************************
    # HOST OS TIPS/TRICKS *
    #********************************************************************
    #route add 10.0.1.20 dev tun0
    #route add 192.168.101.8 mask 255.255.255.255 192.168.101.7 metric 1

    —————————————————————————————————–
    i made all the necessary changes instead of cckd its z110 here the folder i placed tehm according to relative files the hercules.exe was running too succesfully after pressing esc i cud see the graphic mode and also was able to see the image files running on it … but i cud not see the z/os terminal on the 3270 screens .. plzz help me i need to set up this envronment.
    thanx in adavnce

  2. yup got the z os screen but in my console screen is aw this statement “stc00087 *01 ikt003d TCAS unable to accept logons,reason code= 0090 retry or term”
    and in z/os screen
    when logon ibmuser

    its showing message lcl701 unable to establsih session -init self failed with sense 08570002

  3. Hi,
    im on the z/OS terminal on the 3270 screen…i cant login using the password..what should i do?

    Thanks!

  4. I brought up the system. TSO sigon comes up no problem. Logon using supplied info, and it fails with JCL ERROR. Any suggestions? Can’t find what is happening. Very frustrating………

  5. OK…. went thru the entire process, did everything as indicated. System comes up and the TSO signon screen comes up. Try to logon as IBMUSER with PW **** and it immediately fails on a JCL ERROR….. It says the the proc ISPFPR01 cannot be found…. Any thoughts ????? This is really a bummer…. no way of getting it to run because of the missing procedure. Any assistance would be greatly appreciated. Thank you for your time…..

  6. IBMUSER Logon-problem:
    There is a youtube-video at 5:51, here the name of the “Procedure” is: ISPFPROC (not ISPFPR01, at the end letter O and then C.
    Here I saw also the “Size”-Parameter with “2048000”, that is nonsense or a mistake (maybe it will be cut intern to 2048). Use instead 2024 or 4048.

  7. Sorry, now I made a little mistake concerning the SIZE-parameter. I wanted to say: Use 2048 or better 4096 (x * 1024 kB) of storage which are very good values.
    4096 are 4 MB and 2048000 (like on the panel in the youtube-video) are enormous 2 GB of (virtual) Storage, but it works fine with that.
    But do not use 2048000 if you have to pay for that. 😉

  8. To problem (shashi) “01 ikt003d TCAS unable to accept logons,reason code= 0090 retry or term”:
    What is to do? Just wait a moment or a minute until VTAM startup has been finished. Then use the first number of the message above, in this case “01” and enter “r 01,retry” or only “1retry”. If you see the message “TCAS ACCEPTING LOGONS” you can logon with TSO. Have fun.

  9. Do I need license to run this ZOS on Hercules. Or its free like Hercules. Since its just a Z/OS Emulation Files right? Not real ZOS?

  10. Hi all,

    this post and its comments have helped me a lot so I hope give back just a little bit. I’ve created my config file for zOS 1.10 taking a bit from here, taking another part from there and so on.

    Well, it looks like:

    #********************************************************************
    # CONFIGURAGION FILE FOR ADCD Z/OS 1.10 SUMMER *
    #********************************************************************
    # FOR ALL THE LOADPARM OPTIONS VISIT: *
    # http://dtsc.dfw.ibm.com/MVSDS/'HTTPD2.ADCD.GLOBAL.HTML(READ110S)‘ *
    #********************************************************************

    ARCHMODE z/Arch
    ALRF ENABLE
    CCKD RA=2,RAQ=4,RAT=2,WR=2,GCINT=5,GCPARM=0,NOSTRESS=0,TRACE=0,FREEPEND=-1
    CNSLPORT 3270
    CONKPALV (3,1,10)
    CPUMODEL 3090
    CPUSERIAL 012345
    DIAG8CMD ENABLE
    ECPSVM YES
    LOADPARM 0A82DB..
    LPARNAME HERCULES
    MAINSIZE 1024
    MOUNTED_TAPE_REINIT DISALLOW
    NUMCPU 4
    OSTAILOR Z/OS
    PANRATE 80
    PGMPRDOS LICENSED
    SHCMDOPT NODIAG8
    SYSEPOCH 1900
    TIMERINT 50
    TZOFFSET +1400
    YROFFSET 0
    HERCPRIO 0
    TODPRIO -20
    DEVPRIO 8
    CPUPRIO 0
    PANTITLE “ADCD z/OS 1.10 on Hercules”

    #********************************************************************
    # SYMBOLS DEFINITION *
    #********************************************************************

    #DEFSYM DASD “Z110/DASD”
    DEFSYM DASD “cckd”
    #DEFSYM PROD “Z110/PROD”
    #DEFSYM PRTR “Z110/PRTR”

    #********************************************************************
    # ORIGINAL ADCD z/OS 1.10 SUMMER IMAGES *
    #********************************************************************

    #000F 1403 $(PRTR)/IBM/PRTR.000F

    0A80 3390 $(DASD)/JARES1.CCKD
    0A81 3390 $(DASD)/JARES2.CCKD
    0A82 3390 $(DASD)/JASYS1.CCKD
    0A83 3390 $(DASD)/JAUSS1.CCKD
    0A84 3390 $(DASD)/JAPRD1.CCKD
    0A85 3390 $(DASD)/JAPRD2.CCKD
    0A86 3390 $(DASD)/JAPRD3.CCKD
    0A87 3390 $(DASD)/JAIMS1.CCKD
    0A88 3390 $(DASD)/JACIC1.CCKD
    0A89 3390 $(DASD)/JADB91.CCKD
    0A8A 3390 $(DASD)/JADB92.CCKD
    0A8B 3390 $(DASD)/JADB93.CCKD
    0A8C 3390 $(DASD)/JAWAS1.CCKD
    0A8D 3390 $(DASD)/JAWAS2.CCKD
    0A8E 3390 $(DASD)/JAWAS3.CCKD
    0A8F 3390 $(DASD)/SARES1.CCKD #LOADPARM 0A99SAM1

    0A91 3390 $(DASD)/JADIS1.CCKD
    0A92 3390 $(DASD)/JADIS2.CCKD
    0A93 3390 $(DASD)/JADIS3.CCKD
    0A94 3390 $(DASD)/JADIS4.CCKD
    0A95 3390 $(DASD)/JADIS5.CCKD
    0A96 3390 $(DASD)/JADIS6.CCKD

    #********************************************************************
    # CUSTOM IMAGES *
    #********************************************************************
    # VOLUME NAMING CONVENTION *
    # .—–> 1 CHAR SYSPLEX NAME (SYSPLX “A”) *
    # |.–.-> 3 CHAR PURPOSE RES=SYSRES SPL=SPOOL CKP=CHECKPOINT *
    # || \> USR=USER CFG=SYS PAG=PAGE SMS=SMS *
    # || .-> SEQUENCE OR SYSCLONE FOR CONFIGURATION VOLUME *
    # VV V *
    # xxxxxx *
    #********************************************************************
    0AA0 3390 $(DASD)/SYS/SYS001.CCKD
    0AA1 3390 $(DASD)/SYS/SPL001.CCKD
    0AA2 3390 $(DASD)/SYS/SPL002.CCKD
    0AA3 3390 $(DASD)/SYS/SPL003.CCKD
    0AA4 3390 $(DASD)/SYS/SPL004.CCKD
    0AA5 3390 $(DASD)/SYS/SPL005.CCKD
    0AA6 3390 $(DASD)/SYS/CKP001.CCKD
    0AA7 3390 $(DASD)/SYS/CKP002.CCKD
    0AA8 3390 $(DASD)/SYS/PAG001.CCKD
    0AA9 3390 $(DASD)/SYS/PAG002.CCKD
    0AAA 3390 $(DASD)/SYS/USS001.CCKD
    0AAB 3390 $(DASD)/SYS/AUT001.CCKD
    0AAC 3390 $(DASD)/SYS/DMP001.CCKD
    0AAF 3390 $(DASD)/SYS/AZZSAD.CCKD

    0AB0 3390 $(DASD)/SYS/USR001.CCKD
    0AB1 3390 $(DASD)/SYS/USR002.CCKD
    0AB2 3390 $(DASD)/SYS/USR003.CCKD
    0AB3 3390 $(DASD)/SYS/USR004.CCKD
    0AB4 3390 $(DASD)/SYS/USR005.CCKD

    #********************************************************************
    # DISPLAY TERMINALS *
    #********************************************************************
    0700 3270
    0701 3270
    0702 3270
    0703 3270

  11. Thank you for the effort, valuable information here. Anyone successfully running an FTP Server on ZOS / Hercules? How would my hercules.conf look like for FTP Server? My FTPD in the Proclib cannot be started, it gets automatically purged after a second or so. Also my TCPIP does not give me a reasonable address :( Would I need to patch something in the ADCD.PARMLIB? If so which Member and how?

    All I need to do is mass-transfer PC to TSO and Vice versa using a windows based FTP Client. Any help is appreciated!

  12. hi all,
    please help me to find out the system utilities (idcams,iebgener,….)
    as i am using z/os 1.10 and i am using DADS dumps of 15GB.

  13. HHCCP029E z/Arch mode IPL failed: CSW status=0E00

    Hi ALL,

    I couldn’t start z/os . I got the following error :

    HHCCP002I CPU0000 thread started: tid=000026C8, pid=10140, priority=0 +
    HHCTT002I Timer thread started: tid=00002EF8, pid=10140, priority=-20
    HHCCP003I CPU0000 architecture mode z/Arch
    HHCCP002I CPU0001 thread started: tid=000030BC, pid=10140, priority=0
    HHCCP003I CPU0001 architecture mode z/Arch
    HHCCP002I CPU0002 thread started: tid=000028C0, pid=10140, priority=0
    HHCCP003I CPU0002 architecture mode z/Arch
    HHCCP002I CPU0003 thread started: tid=00002E54, pid=10140, priority=0
    HHCCP003I CPU0003 architecture mode z/Arch
    HHCPN001I Control panel thread started: tid=000020D8, pid=10140
    HHCAO001I Hercules Automatic Operator thread started;
    tid=00002954, pri=0, pid=10140
    HHCTE009I Client 127.0.0.1 connected to 3270 device 0:0700
    HHCTE009I Client 127.0.0.1 connected to 3270 device 0:0701
    herc ipl 0aa0
    HHCCP048I 0AA0:CCW=03000000 00000001=>000A0000 0000000F 03000000 00000001 ……
    HHCCP075I 0AA0:Stat=0E00 Count=0001
    HHCCP076I 0AA0:Sense=80000000 00FFFF02 00000000 00000000 00000000 00000000
    HHCCP077I 0AA0:Sense=CMDREJ
    HHCCP029E z/Arch mode IPL failed: CSW status=0E00
    Sense=80000000 00FFFF02 00000000 00000000 00000000 00000000 00000080
    HHCTE007I 3270 device 0701 client 127.0.0.1 connection closed
    HHCTE007I 3270 device 0700 client 127.0.0.1 connection closed
    Command ==>

    ======================================================
    hercules.cnf
    =======================================================
    #
    # Hercules Emulator Control file…
    # Description:
    # MaxShutdownSecs: 15
    #
    #
    # System parameters
    #

    ARCHMODE z/Arch
    ALRF ENABLE
    CCKD RA=2,RAQ=4,RAT=2,WR=2,GCINT=5,GCPARM=0,NOSTRESS=0,TRACE=0,FREEPEND=-1
    CNSLPORT 3270
    CONKPALV (3,1,10)
    CPUMODEL 3090
    CPUSERIAL 012345
    DIAG8CMD ENABLE
    ECPSVM YES
    LOADPARM 0A95DB..
    LPARNAME HERCULES
    MAINSIZE 4096
    MOUNTED_TAPE_REINIT DISALLOW
    NUMCPU 4
    OSTAILOR Z/OS
    PANRATE 80
    PGMPRDOS LICENSED
    SHCMDOPT NODIAG8
    SYSEPOCH 1900
    TIMERINT 50
    TZOFFSET +1400
    YROFFSET 0

    HERCPRIO 0
    TODPRIO -20
    DEVPRIO 8
    CPUPRIO 0
    PANTITLE z/OS 1.9 IPL A80?

    # Display Terminals

    0700 3270
    0701 3270
    0702 3270
    0703 3270
    0704 3270

    # DASD Devices

    0A80 3390 D:/DASD/IBM/JARES1.CCKD
    0A81 3390 D:/DASD/IBM/JARES2.CCKD
    0A82 3390 D:/DASD/IBM/JASYS1.CCKD
    0A83 3390 D:/DASD/IBM/JAUSS1.CCKD
    0A84 3390 D:/DASD/IBM/JAPRD1.CCKD
    0A85 3390 D:/DASD/IBM/JAPRD2.CCKD
    0A86 3390 D:/DASD/IBM/JAPRD3.CCKD
    0A87 3390 D:/DASD/IBM/JAIMS1.CCKD
    0A88 3390 D:/DASD/IBM/JACIC1.CCKD
    0A89 3390 D:/DASD/IBM/JADB91.CCKD
    0A8A 3390 D:/DASD/IBM/JADB92.CCKD
    0A8B 3390 D:/DASD/IBM/JADB93.CCKD
    0A8C 3390 D:/DASD/IBM/JAWAS1.CCKD
    0A8D 3390 D:/DASD/IBM/JAWAS2.CCKD
    0A8E 3390 D:/DASD/IBM/JAWAS3.CCKD
    0A8F 3390 D:/DASD/IBM/SARES1.CCKD
    0A91 3390 D:/DASD/IBM/JADIS1.CCKD
    0A92 3390 D:/DASD/IBM/JADIS2.CCKD
    0A93 3390 D:/DASD/IBM/JADIS3.CCKD
    0A94 3390 D:/DASD/IBM/JADIS4.CCKD
    0A95 3390 D:/DASD/IBM/JADIS5.CCKD
    0A96 3390 D:/DASD/IBM/JADIS6.CCKD
    0AA0 3390 D:/DASD/SYS/SYS001.CCKD
    0AA1 3390 D:/DASD/SYS/SPL001.CCKD
    0AA2 3390 D:/DASD/SYS/SPL002.CCKD
    0AA3 3390 D:/DASD/SYS/SPL003.CCKD
    0AA4 3390 D:/DASD/SYS/SPL004.CCKD
    0AA5 3390 D:/DASD/SYS/SPL005.CCKD
    0AA6 3390 D:/DASD/SYS/CKP001.CCKD
    0AA7 3390 D:/DASD/SYS/CKP002.CCKD
    0AA8 3390 D:/DASD/SYS/PAG001.CCKD
    0AA9 3390 D:/DASD/SYS/PAG002.CCKD
    0AAA 3390 D:/DASD/SYS/USS001.CCKD
    0AAB 3390 D:/DASD/SYS/AUT001.CCKD
    0AAC 3390 D:/DASD/SYS/DMP001.CCKD
    0AAF 3390 D:/DASD/SYS/AZZSAD.CCKD
    0AB0 3390 D:/DASD/SYS/USR001.CCKD
    0AB1 3390 D:/DASD/SYS/USR002.CCKD
    0AB2 3390 D:/DASD/SYS/USR003.CCKD
    0AB3 3390 D:/DASD/SYS/USR004.CCKD
    0AB4 3390 D:/DASD/SYS/USR005.CCKD
    0AB5 3390 D:/DASD/SYS/BLANKD.CCKD
    0AB6 3390 D:/DASD/SYS/EQQ001.CCKD

  14. hi ,

    plz help I am getting permission denied for all the cckd files present in IBM folder

    HCHT006I Waiting for HTTP requests on port 8081
    HCDA005E Z110/DASD/IBM/JARES1.CCKD open error: Permission denied
    HCCF044E Initialization failed for device 0A80
    HCDA005E Z110/DASD/IBM/JARES2.CCKD open error: Permission denied
    HCCF044E Initialization failed for device 0A81
    HCDA005E Z110/DASD/IBM/JASYS1.CCKD open error: Permission denied
    HCCF044E Initialization failed for device 0A82
    HCDA005E Z110/DASD/IBM/JAUSS1.CCKD open error: Permission denied
    HCCF044E Initialization failed for device 0A83
    HCTE001I Console connection thread started: tid=00001CE8, pid=7436
    HCTE003I Waiting for console connection on port 3270

    • Hello!

      If you are using Windows, the problem is the .CCKD archives is with attributes has “read-only” activate.

      Select all .cckd archives and press the right mouse button –> then in General flap you will see if “Attribute: read-only “, if activate, deactivate this –> the press ok –> now try ON your Hercules again and be Mainframed!

      PS:In GNU/Linux systems you need change the chmod status of the files with chmod +x .

      Grretings from Brazil,
      Anderson!

  15. Hi guys,
    i compiled a db2 pgm….but during binding it shows maxcc=8….it shows dat authorization error for user adcdmst….
    DSN
    BIND PLAN(ADCDMSTP) MEMBER(BASIC)
    ACTION(REP) RETAIN ISOLATION(CS) VALIDATE(BIND
    DSNT210I -DB9G BIND AUTHORIZATION ERROR
    USING ADCDMST AUTHORITY
    PLAN = ADCDMSTP
    PRIVILEGE = BINDADD
    DSNT201I -DB9G BIND FOR PLAN ADCDMSTP NOT SUCCESSFUL

    is der anyother login for db2???pls share it….

Leave a Reply

Your email address will not be published.